Error: TAPI configuration has changed...(due to modem removed after setup).
Error:
The TAPI configuration has changed and the modem/port selected for this session is no longer valid.
Cause:
The modem identified and set up in the 'HyperTerminal' connection has been removed or moved to a different port. 'HyperTerminal' automatically looks for the closest alternative.
Solution:
Click 'OK' and make sure the modem selected by 'HyperTerminal' is a valid modem.
1) Click 'OK' to close the error message.
2) Select the desired modem.
3) Select 'File' and select 'Properties'.
4) Click the 'Phone Number' tab.
5) Select the correct modem from the 'Connect using' drop-down list box.
6) Click 'Configure...'. (The '<modem> Properties' dialog box appears.)
7) Click the 'General' tab.
8) Select the correct communications port in the 'Port' drop-down list box.
9) Click 'OK'.
10) Click 'Apply' if any changes were made.
11) Open the connection again.
